MX Hazard Zone Meters
Roll over image to zoom in Click on image to zoom
MX Hazard Zone Meters
Exd flow Meter - Macnaught Australia
MX Hazard Zone Meters - Explosion/Flame Proof
Hazard Zone Meters - Macnaught
MX Hazard Zone Meters - Explosion Proof

MX ExD Hazard Zone Meter - Macnaught Australia

Macnaught
REQUEST FOR QUOTE

Macnaught’s Industrial Flow Meter Portfolio includes a wide array of Oval Gear Flow Technologies. We carry a significant inventory of meters, displays, and accessories in our facility.

Call our Meter Hot Line at 1300 840 042 for an immediate applications review and detailed proposal generation.

Or click the Request for Quote button and our team will work up your quotation with urgency.

Macnaught Meters built to last since 1964!

Description

Overview

Macnaught Hazard Zone Overview

Macnaught MX ExD Flow Meters were designed, certified and approved for Class 1 Div 1 applications. Clean Process Fluids only.

The MX Hazard Meter offering provides inline .5% Volumetric Accuracy with .03% Repeatability.

  • In Stock Sizes ¼” thru 4” .5 LPH to 2500 LPM
  • No Flow Conditioning - put the meter where you want it
  • Large in-stock inventory of Hazard Meters and Displays
  • Quick response to Hazard Meter inquiries

Receive an Immediate Flow Meter Proposal or Call our Meter Hotline - 1300 840 042

Request a Quote

NFPA 70 NEC Location Classes, Divisions, and Groups

Class I definition: Flammable gases or vapors may be present

Div 1 definition: Ignitable concentrations of hazards exist under normal operation and/or where the hazard Is caused by frequent maintenance or repair work or frequent equipment failure

Div 2 definition: Ignitable concentrations of hazards exist under abnormal operation conditions

Group A: Acetylene

Group B: Hydrogen, Butadiene, Ethylene, Oxide, Propylene Oxide, and Acrolein

Group C: Ethylene, Cyclopropane, Ethyl Ether

Group D: Acetone, Ammonia, Benzene, Butane, Ethanol, Gasoline, Hexane, Methane, Methanol, Naphtha, Natural Gas, Propane, and Toluene

Hazard Zone / Class FAQ

Q: Can I use a piece of equipment approved for use in a Division 1 hazardous location in a Division 2 hazardous location?
A: Yes. If equipment has been approved for use in a Division 1 hazardous location, it can be used in a Division 2 hazardous location, providing it is in the same class and group.
Q: Can equipment approved for a Class I hazardous location be used in a Class II hazardous location?
A: No. Equipment approved for use in Class I hazardous locations cannot be used in Class II hazardous locations.
Q: Are Divisions and Zones equivalent to one another?
A: When comparing Divisions and Zones, Division 2 is equivalent to Zone 2, but Division 1 is equivalent to either Zone 0 or 1

Contact Macnaught for approved Hazard Zone Liquid Flow Meters – the leading global manufacturer of specialized Oval Gear & Turbine Flow Measurement Devices.

Receive an Immediate Flow Meter Proposal or Call our Meter Hotline - 1300 840 042

Request a Quote